[Alberg30] sinks for a refit

[Mary & Bill Mahony]

Re: [Alberg30] sinks for a refitJim, Wally--thanks for the idea!

Bill & Mary Ann
#276 "Mary Ann"
  ----- Original Message ----- 
  From: Wally Moran 
  To: James Davis ; Alberg 30 public list 
  Sent: Monday, September 30, 2002 1:34 AM
  Subject: Re: [Alberg30] sinks for a refit


  Further suggestion - I just replaced a round sink with a rectangular one on my boat. The round one used to trap plates in it about half way down and was a general pain to use effectively. Go with a rectangular or square sink if you have a choice, it's much more convenient.


  Wally


    For the sink itself, measure the diameter and go to K-Mart.  Get a shallow round stainless steel bowl.  You will have to drill three holes for the bolts.  Cheap and effective.
    Jim Davis
    S/V Isa Lei
    CT 35




-- 

  The gods do not deduct from man's allotted span the hours spent in sailing. Anon
  www.georgianbaysailing.ca for interesting reading for sailors
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020930/fb79e1e8/attachment-0004.htm>