[Alberg30] Beck Beam Details

Mike Lehman sail_505 at hotmail.com
Wed Apr 30 12:55:54 PDT 2003


I used 5/16" and am surprised to hear mention of using 1/4" that is what the
old bent ones were. 6" sounds right, but at the cost of the bolts, I would
measure the thickness of the beam and add the thickness of the plates and
add another 1/4" to 1/2" for the nuts and washers to be sure. You'll need to
got to a marine store for the fastners not Lowes or Home Depot.


----- Original Message -----
From: "Hansen, Richard D LTC Student" <Richard.Hansen at carlisle.army.mil>
To: "'Alberg 30 public list'" <public-list at alberg30.org>
Sent: Wednesday, April 30, 2003 11:21 AM
Subject: RE: [Alberg30] Beck Beam Details


> Deck Beam article suggests purchasing 1/4 Stainless Steel Bolts to secure
> plates to beam.  Two questions:
> 1. What length of bolts...6 inches?
> 2. Where can one buy them (Lowes and H-Depot sell only galvanized)?
> Thanks
>
> -----Original Message-----
> From: Mike Lehman [mailto:sail_505 at hotmail.com]
> Sent: Friday, April 04, 2003 8:51 PM
> To: Alberg 30 public list
> Subject: Re: [Alberg30] Beck Beam Details
>
>
> You should jack it up until the curve profile of the existing beam matches
> that of the aluminum reinforcement plates. I am having a hard time
> understanding what the piece of wood is/does that you describe. Sounds
like
> something that was added and will need to be removed before the plates can
> be installed.
>
>
> ----- Original Message -----
> From: "Hansen, Richard D LTC Student" <Richard.Hansen at carlisle.army.mil>
> To: "'Alberg 30 public list'" <public-list at alberg30.org>
> Sent: Friday, April 04, 2003 1:46 PM
> Subject: [Alberg30] Beck Beam Details
>
>
> > -Sunspur is on the hard with mast removed.
> >
> > -Mast removal seems to have allowed the deck beam to return to a
position
> to
> > where the forepeak/closet door now closes without any binding.
> >
> > -My alum brackets need some minor mods at corners, but appear to fit
> against
> > beam ok.
> >
> > -There is, however, a 16 inch or so 3/4 inch piece of wood (teak?) in
the
> > fore peak side of doorway.  It is flush with beam at center, but about
> > 1/4-3/8 inch below beam on both ends of piece.  Separation of beam from
> > glass is evident when looking at this 16" piece of wood.
> > Here are the questions:
> > 1. Can I go ahead and install deck beam plates or would you recommemd
that
> I
> > still jack up deck a bit?
> > Thank you.
> >  +---------------------------------------------------------------+
> >  |                This Old Boat by Don Casey                     |
> >  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> >  +---------------------------------------------------------------+
> >
> > Public-list mailing list -- Public-list at alberg30.org
> > http://www.alberg30.org/mailman/listinfo/public-list
> > To unsubscribe: email to Public-list-request at alberg30.org
> > Include command "unsubscribe <password>" in subject or body.
> > Use command "help" for more options.
> >
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1051732554.0


More information about the Public-List mailing list