[Alberg30] "How-to" replace windows
Bill Blevins
billblevins at mac.com
Tue Apr 1 18:54:44 PST 2003
Good point.
Each window was a very different shape. I cut the glass almost exactly
the same size as the opening using a cardboard pattern for each, then
used the Dremmel tool to grind the edges to create about 1/8 inch space
all the way around each window. I duct taped the glass in the holes,
then used small pieces of cardboard to sit the glass in the space so
that there was even area around each, then tacked 4 corners with epoxy
overnight.
Bill
--
On Tuesday, April 1, 2003, at 12:16 PM, EddieDiver at aol.com wrote:
> In Step #6, you say that you cut the plexiglass to fit almost exactly.
> Most
> plastic manufacturers (plexiglass and polycarbonate/Lexan) recommend
> leaving
> perimeter space for expansion of the pane due to solar heat. A 24 inch
> length
> of plastic can expand 1/8 inch, so they recommend that expansion space
> of
> that amount be added. Ed.Schroeder #303 Emotional Rescue
> +---------------------------------------------------------------+
> | This Old Boat by Don Casey |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
+---------------------------------------------------------------+
| This Old Boat by Don Casey |
| http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
+---------------------------------------------------------------+
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
1049252084.0
More information about the Public-List
mailing list