[Alberg30] Seals and gaskets

[George Dinwiddie]

Take a look at these (http://www.alberg30.org/store/gaskets.html) and 
let me know if they're suitable for you.  I'd welcome the feedback.

  - George

greg vandenberg wrote:
> I am looking for some helpful information on where I might purchase "D" shaped
> gasket material that is so prevalent on Albergs. The material is approx. 3/8 x
> 3/8 inch (closed cell foam rubber material) The source referred to it as EDPM
> and has a adhesive backing. I have found one source but requires 150 foot
> purchase and I only need 40 ft.

-- 
  ----------------------------------------------------------------------
   Hope your road is a long one.                        George Dinwiddie
   May there be many summer mornings when,       gdinwiddie at alberg30.org
   with what pleasure, what joy,                 http://www.Alberg30.org
   you enter harbors you're seeing for the first time;
                                            from 'Ithaka' by C.P. Cavafy
  ----------------------------------------------------------------------

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1050337099.0