[Alberg30] Seals and gaskets

[John Allen]

> If you are talking about the gaskets used for the lazarette lids and 
> hatches, I may have a suggestion.

>
> ----Original Message Follows----
> From: greg vandenberg <greg at vandenbergphoto.com>
> Reply-To: Alberg 30 public list <public-list at alberg30.org>
> To: Alberg 30 public list <public-list at alberg30.org>
> Subject: [Alberg30] Seals and gaskets
> Date: Mon, 14 Apr 2003 09:36:13 -0400
>
> I am looking for some helpful information on where I might purchase 
> "D" shaped
> gasket material that is so prevalent on Albergs. The material is 
> approx. 3/8 x
> 3/8 inch (closed cell foam rubber material) The source referred to it 
> as EDPM
> and has a adhesive backing. I have found one source but requires 150 foot
> purchase and I only need 40 ft.
>
> Kindest Regards- Greg



 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1050339517.0