[Alberg30] shaft packing?

[Tom Sutherland]

Fellow Albergers,

I remember reading on the list (I think) that the size packing for our
Alberg 30's is 3/16. 

I measured the inside of the packing gland and it is 1 and 3/8. The
shaft is 7/8. I would have thought this would call for 1/4 inch packing.

Has anyone replaced their packing recently and do they recall what size
they used?

I am using the drip less moldable packing but it does call for regular
packing on both sides of the expensive green stuff.

Thanks for any help.

Tom S
A30  412
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.