[Alberg30] stanchion bases

[George]

ahoy The stanchions  and  rails on #259 are all 1 in. and all the bases are
pealing badley    Hope to find some with original bolt centers  George K
A259
----- Original Message -----
From: "Brian and Elaine Timmins" <timmins at optonline.net>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Tuesday, February 11, 2003 6:07 PM
Subject: Re: [Alberg30] stanchion bases


> I used the original bases from the Alberg which were for 7/8ths tube. I
> reamed them out using adjustable reamers until the 1" stantion fit
properly.
> They still had ample "meat" left. It's easy to do if you can get your
hands
> on the reamer(s).
> Brian
> > hello there ! has anyone found a vendor for stanchion bases 4in sq,1in
> tube,
> > two bails on sides
>
> _______________________________________________
>
> UPDATED: http://alberg30.org/store/AbeBooks.html
> _______________________________________________
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

_______________________________________________

UPDATED: http://alberg30.org/store/AbeBooks.html
_______________________________________________

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1045013633.0