[Alberg30] engine pan

[George Dinwiddie]

Check Steve Weingart's article in the Maintenance Manual.  He went into 
a lot of detail on removing and replacing that plate.

  - George

sousa, stephen (ENG) wrote:
> Rob,
> 
> I would like to remove the mast plate from the deck to seal that area, the
> original material from 1965 is breaking down. I have read many statements
> concerning this task, what challenges lie ahead in removing the plate from
> the deck.
> 
> 1) Are the screws tapped into the glass or are there nuts/bolts holding this
> plate to the boat?
> 2) It looks as though the previous owner removed the step, broke a few bolts
> and retapped into the plate on deck. 
-- 
  ----------------------------------------------------------------------
   Hope your road is a long one.                        George Dinwiddie
   May there be many summer mornings when,       gdinwiddie at alberg30.org
   with what pleasure, what joy,                 http://www.Alberg30.org
   you enter harbors you're seeing for the first time;
                                            from 'Ithaka' by C.P. Cavafy
  ----------------------------------------------------------------------

_______________________________________________

Looking for a hard-to-find or out-of-print book?  Or just any book, but 
looking for a good deal on a used book?  Check the Advanced Book Exchange,
one of my personal favorite online stores!
http://alberg30.org/store/AbeBooks.html
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1042299603.0