[Alberg30] engine bed?

[Tom Sutherland]

Dear group,

I would be interested in anyone's opinion on the preparation of my
engine bed. The engine I am installing is (as you might expect) not
going to bolt right in. In that I am not anywhere near another Alberg
(central Ky) it is not easy for me to check and see what others have
done. My intentions are to make a couple of mahogany (So.Am.) rails and
try to custom fit them in place. Attach them with epoxy and lag bolts
and then lag bolt the motor mounts to these rails. I also thought I
might epoxy 3/8ths machine bolts upside down in the rials before I
install them. 

I would certainly welcome any thoughts or comments on these ideas ...
you won't hurt my feelings.

Tom S
A-30 #412
InCahoots
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1054559250.0