[Alberg30] engine bed?

[George Dinwiddie]

Tom,

You might want to look at 
http://www.alberg30.org/maintenance/MechanicalPropulsion/Diesel/InstallingEngineMounts.html 
for another idea.  What engine are you installing?

  - George

Tom Sutherland wrote:
> Dear group,
> 
> I would be interested in anyone's opinion on the preparation of my
> engine bed. The engine I am installing is (as you might expect) not
> going to bolt right in. In that I am not anywhere near another Alberg
> (central Ky) it is not easy for me to check and see what others have
> done. My intentions are to make a couple of mahogany (So.Am.) rails and
> try to custom fit them in place. Attach them with epoxy and lag bolts
> and then lag bolt the motor mounts to these rails. I also thought I
> might epoxy 3/8ths machine bolts upside down in the rials before I
> install them. 

-- 
  ----------------------------------------------------------------------
   Hope your road is a long one.                        George Dinwiddie
   May there be many summer mornings when,       gdinwiddie at alberg30.org
   with what pleasure, what joy,                 http://www.Alberg30.org
   you enter harbors you're seeing for the first time;
                                            from 'Ithaka' by C.P. Cavafy
  ----------------------------------------------------------------------

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1054562409.0