[Alberg30] exhaust riser assembly

[Pat Drenning]

Jay,

I put two exaust systems together and followed Bruce Rankins lead.  I
used the hi-temp RTV (red) on all the threads.

Jay Davenport wrote:
> 
> I am assembling a bronze exhaust riser for my Atomic 4. There are about 5 pieces involved. Is there any particular plumber's paste or tape which is most appropriate for the threaded connections in this kind of application?
> 
> Jay Davenport
> 
> Revolution, A30 #526
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1048787479.0