[Alberg30] Exhaust for universal 3M-20

[PLefkovith at aol.com]

To members with Universal 3M-20
Will you please respond as to how you piped up your exhaust system from 
the Engine output flange. The "Old Copper Monster" weights 14 pounds and 
you will void the warranty if a piping system weighting more then 8Lbs 
is hung from the output flange. The Westerbeak mixing elbow weights 5 Lbs,
that allows three Lbs of pipe to get to the water Muffler. The only 
configuration
I can come up with is to mount the mixing elbow in an insulated junction box,
run insulated pipe down the wall and place a section of flexible 316 Stainless
Steel corrugated pipe between the engine flange and the hard pipeing system.
How has other members with 1972 Liner accomplished this installation?
Please respond. NO "Help". My new engine installation is 90% complete
IF you can send Photos
                                   Paul R lefkovith
                                   Plefkovith at aol.com

 +======================================================================================+
 |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents per foot     |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?pid=25719 |
 +======================================================================================+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1047175917.0