[Alberg30] Exhaust for universal 3M-20

[Brian and Elaine Timmins]

Are you sure you're reading the specs right?  The limiting factor for the
exhaust is the physical weight of the exhaust?
Eliminate the mixing elbow. Use the "copper monster" but arrange a bracket
to hold it in position. If you can get it to be located directly in line
with the engine output flange by creative bracketing (without using the
mounting bolts), the effective weight of the copper monster will be 0 lbs.
Brian
----- Original Message -----
From: <PLefkovith at aol.com>
To: <public-list at alberg30.org>
Sent: Saturday, March 08, 2003 9:11 PM
Subject: [Alberg30] Exhaust for universal 3M-20


> To members with Universal 3M-20
> Will you please respond as to how you piped up your exhaust system from
> the Engine output flange. The "Old Copper Monster" weights 14 pounds and
> you will void the warranty if a piping system weighting more then 8Lbs
> is hung from the output flange. The Westerbeak mixing elbow weights 5 Lbs,
> that allows three Lbs of pipe to get to the water Muffler. The only
> configuration
> I can come up with is to mount the mixing elbow in an insulated junction
box,
> run insulated pipe down the wall and place a section of flexible 316
Stainless
> Steel corrugated pipe between the engine flange and the hard pipeing
system.
> How has other members with 1972 Liner accomplished this installation?
> Please respond. NO "Help". My new engine installation is 90% complete
> IF you can send Photos
>                                    Paul R lefkovith
>                                    Plefkovith at aol.com
>
>
+===========================================================================
===========+
>  |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents
per foot     |
>  |
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?p
id=25719 |
>
+===========================================================================
===========+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.


 +======================================================================================+
 |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents per foot     |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?pid=25719 |
 +======================================================================================+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1047183152.0