[Alberg30] Deck Pipe installation

[Wilhelm Ydel]

Thank you John and Mike, I will use your collective advise.

Bill
----- Original Message -----
From: "John Birch" <Sunstone at cogeco.ca>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Tuesday, March 04, 2003 4:33 PM
Subject: Re: [Alberg30] Deck Pipe installation


> Dremel makes a cylindrical rasp type bit that is exactly the height of the
> balsa coring. After cutting the hole, I use the Dremel bit to cut the core
> back about a 1/4 - 3/8 of an inch (the radius of the tool) and fill the
gap
> with Marine Tex Epoxy to prevent moisture from getting into the core and
> then bed and install as Mike suggests.
>
> John
>
> ----- Original Message -----
> From: "Mike Lehman" <sail_505 at hotmail.com>
> To: <public-list at alberg30.org>
> Sent: Tuesday, March 04, 2003 4:15 PM
> Subject: Re: [Alberg30] Deck Pipe installation
>
>
> > I replaced the original round one with an oval one like the one offered
> here
> > at sailnet.com:
> >
> > http://www.sailnet.com/store/item.cfm?pid=17945
> >
> > I really like the hinged idea because it is one less piece to lose
> overboard
> > and it stays open easily.
> >
> > Process:
> >
> > Trace the fitting onto the deck
> > Use a sabresaw or dremmel tool to cut out the opening. (A sabresaw would
> be
> > difficult to use since the space is so limited).
> > Dry fit the deck pipe and drill one hole at a time putting a bolt into
> each
> > hole as it is drilled to keep it in alignment.
> > For the final installation, use a good marine bedding compound (Rule
> > Elastomeric, of Boat Life, or 3M 101) and apply a liberal bead of
caulking
> > to the fitting and put the fitting in place. Tighten the screws and
remove
> > the excess caulking with a paper towel and maybe some acetone if
> necessary.
> >
> > I have never had or heard the chain banging around in the forepeack and
> have
> > sail through some pretty nasty sh*t. After 30 years, there is no
evidence
> of
> > any damage from this occuring either.
> >
> > Mike Lehman
> > "Gilleleje" #505
> >
> >
> >
> >
> >
> > ----Original Message Follows----
> > From: <bill at ydelco.com>
> > Reply-To: bill at ydelco.com, Alberg 30 public list
> <public-list at alberg30.org>
> > To: "Alberg 30 public list" <public-list at alberg30.org>
> > Subject: [Alberg30] Deck Pipe installation
> > Date: Tue, 4 Mar 2003 15:30:49 -0500
> >
> > I would like install a Deck Pipe for my anchor chain and rode. I know
that
> I
> > need to seal the core of the deck in some way and want to do the job
> > correctly.
> >
> > Could someone please give me some step by step guidance.
> > Also has anyone lined the hull in the bow with the snap together rubber
> > floor covering to keep the chain from banging against the bare hull.
> >
> > Bill Ydel
> > SallyB #441
> > .
> >
> >
> >
> >
> >
>
+===========================================================================
> ===========+
> >   |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51
> cents
> > per foot     |
> >   |
> >
>
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?p
> id=25719
> > |
> >
> >
>
+===========================================================================
> ===========+
> >
> > Public-list mailing list -- Public-list at alberg30.org
> > http://www.alberg30.org/mailman/listinfo/public-list
> > To unsubscribe: email to Public-list-request at alberg30.org
> > Include command "unsubscribe <password>" in subject or body.
> > Use command "help" for more options.
> > I rep[lace the small round
> >
> > _________________________________________________________________
> > Add photos to your messages with MSN 8. Get 2 months FREE*.
> > http://join.msn.com/?page=features/featuredemail
> >
> >
> >
>
+===========================================================================
> ===========+
> >  |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51
cents
> per foot     |
> >  |
>
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?p
> id=25719 |
> >
>
+===========================================================================
> ===========+
> >
> > Public-list mailing list -- Public-list at alberg30.org
> > http://www.alberg30.org/mailman/listinfo/public-list
> > To unsubscribe: email to Public-list-request at alberg30.org
> > Include command "unsubscribe <password>" in subject or body.
> > Use command "help" for more options.
>
>
>
+===========================================================================
===========+
>  |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents
per foot     |
>  |
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?p
id=25719 |
>
+===========================================================================
===========+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.



 +======================================================================================+
 |     New England Ropes on Sale;  EXAMPLE: 1/2 inch Sta-Set only 51 cents per foot     |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066&p=store/item.cfm?pid=25719 |
 +======================================================================================+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1046816075.0