[Alberg30] rudder attachment

[chrishardy]

This is my problem I don't have good slots in any of the screws I was 
going to heat them and use an easyout®

George Dinwiddie wrote:

> chrishardy wrote:
>
>> I would like to find archives of rudder shoe ,pintle and gudgeon 
>> replacement inspection etc. but I don't know where to look.
>
>
> There's a Google box on almost every page of www.alberg30.org that 
> searches the site, including the message archives.  There's a photo of 
> the fasteners at 
> http://www.alberg30.org/maintenance/Steering/CreviceCorrosion/  Make 
> sure you use bronze--you can see what happens to stainless steel.  
> Other places to find silicon fasteners are
>     http://www.chesfast.com/
>     http://www.jamestowndistributors.com/
>
>> The screws that attach my fittings look very degraded and I would 
>> like to replace parts and fasteners. I know I will have trouble 
>> getting the screws out-  any help out there?  Chris
>
>
> Use heat to soften the caulk and, if the bolts are really frozen, a 
> hand impact tool (like 
> http://www.thetoolwarehouse.net/shop/LIS-29200.html, but I don't know 
> this company) might help.  If the slot is gone on the flat heads, you 
> can cut a new one with a Dremel tool 
> (http://www.alberg30.org/maintenance/tools/dremel.html)
>


 +---------------------------------------------------------------+
 |  Boatowners Mechanical And Electrical Manual by Nigel Calder  |
 | http://www.amazon.com/exec/obidos/ASIN/007009618X/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1047349609.0