[Alberg30] Engine installation

[R.C. Alley]

Jim: I just got from Michigan propeller the recommendation to use a 13 x 7
3-blade with my Universal M-18. About 14 hp with a 2-1 trans (hurth 50).
Interesting.

Rob
----- Original Message -----
From: "James Davis" <a30240 at earthlink.net>
To: "Alberg30 General List" <public-list at alberg30.org>
Sent: Friday, March 28, 2003 8:41 PM
Subject: [Alberg30] Engine installation


> For flex coupling there are also the type that bolt in between your
existing flanges.  A couple examples are in:
> Defender p 171 and West p 253.  these may require shortning the shaft, but
allow you to use the flanges that came with the engine.   When I repowered
#240 I used this type coupler and am quite happy with it.  I wish my current
boat had something as simple.  On #240 I used a 13x13 three blade prop with
the Yanmar 2GM.
>
> Jim Davis
> S/V Isa Lei
> CT 35
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>


 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1048916047.0