[Alberg30] Stove chimney

[Mike Lehman]

I made the first cut with a hack saw and it turn out like sh*t. Fortunately
It was still too long and had to cut it again and did so with a band saw and
it turned out Great!


----- Original Message -----
From: "Gordon LACO" <mainstay at csolve.net>
To: <public-list at alberg30.org>
Sent: Tuesday, May 20, 2003 10:24 PM
Subject: [Alberg30] Stove chimney


> Well,
>
> After staring at it for months in my dining room, I am going to try to
> install the Dickenson Woodstove.
>
> George, or anybody, have you got any advice on how to cut the stainless
> steel tube that forms the flue inside the boat?  I have to trim mine a
> little and do not know how to make a clean cut.
>
> PS had my first overnighter in the boat his past weekend - terrific sail.
>
> Gord
> Surprise #426
>
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1053565815.0