[Alberg30] Stove chimney

[Gordon LACO]

on 5/21/03 9:10 PM, Mike Lehman at sail_505 at hotmail.com wrote:

> I made the first cut with a hack saw and it turn out like sh*t. Fortunately
> It was still too long and had to cut it again and did so with a band saw and
> it turned out Great!
> 
> 
> ----- Original Message -----
> From: "Gordon LACO" <mainstay at csolve.net>
> To: <public-list at alberg30.org>
> Sent: Tuesday, May 20, 2003 10:24 PM
> Subject: [Alberg30] Stove chimney
> 
> 
>> Well,
>> 
>> After staring at it for months in my dining room, I am going to try to
>> install the Dickenson Woodstove.
>> 
>> George, or anybody, have you got any advice on how to cut the stainless
>> steel tube that forms the flue inside the boat?  I have to trim mine a
>> little and do not know how to make a clean cut.
>> 
>> PS had my first overnighter in the boat his past weekend - terrific sail.
>> 
>> Gord
>> Surprise #426
>> 
>> +---------------------------------------------------------------+
>> |                This Old Boat by Don Casey                     |
>> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>> +---------------------------------------------------------------+
>> 
>> Public-list mailing list -- Public-list at alberg30.org
>> http://www.alberg30.org/mailman/listinfo/public-list
>> To unsubscribe: email to Public-list-request at alberg30.org
>> Include command "unsubscribe <password>" in subject or body.
>> Use command "help" for more options.
>> 
> +---------------------------------------------------------------+
> |                This Old Boat by Don Casey                     |
> | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
> +---------------------------------------------------------------+
> 
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> 
Thanks Mike and George -

I have had a friend offer me his Dremel tool, which he figures will make a
good cut.  I will experiment a little.

Gord

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1053608334.0