[Alberg30] Coamings

Don Campbell dk.campbell at sympatico.ca
Fri Oct 17 06:11:49 PDT 2003


There is a very heavy 3.5 inch double sided rubber tape with good adhesive
between the coamings and the gelcoat. It is best if you can find or make a
very wide chisel and work very gradually from one end to the other.
Don

James Schueler wrote:

> Hi there.
>
> Does anyone have experience with removing the coamings. I'm not happy
> with the way the sanding is going and there are some areas that I can't
> get to. In order to make it come out as I would like I'm thinking of
> removing the coamings but would like to know what to expect. In
> preparation for painting the deck most of the hardware has been removed
> so the removal would be a benefit in that area also.
>
> Thanks,
>
> James
>  +---------------------------------------------------------------+
>  |                This Old Boat by Don Casey                     |
>  | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
>  +---------------------------------------------------------------+
>
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1066396309.0


More information about the Public-List mailing list