[Alberg30] Coamings

[George Dinwiddie]

You can use any caulk, but we've had better luck with 1/16" thick 
neoprene gasketing.  We got some that's adhesive on one side, for ease 
of installation.  Look under "gaskets" in the yellow pages and you 
should find some industrial suppliers.  Prices are all over the map, so 
call around.  Also see if you can find some scrap they'll sell cheap.

  - George

James Schueler wrote:
> Don,
> 
> Thanks. After I paint do I need to find the double sided tape or can I
> use some sort of bedding material? And does it have to be adhesive?
> 
> Thanks,
> 
> James
> 
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of Don Campbell
> Sent: Friday, October 17, 2003 9:12 AM
> To: Alberg 30 public list
> Subject: Re: [Alberg30] Coamings
> 
> There is a very heavy 3.5 inch double sided rubber tape with good
> adhesive
> between the coamings and the gelcoat. It is best if you can find or make
> a
> very wide chisel and work very gradually from one end to the other.
> Don

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------




 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1066430523.0