[Alberg30] hull and deck joint

[George Dinwiddie]

Machine screws take a nut; they're not like sheet-metal screws.

  - George

Bob wrote:
> Hi Mike,
> 
> Did you put the new fasteners in the same rivet holes after drilling them
> out?
> When you say #10 flat-head machine screws, are they an actual screw type or
> thru bolt type with nut and lock/washer?
> 
> I have noticed some leaking under the rail of my boat and wonder if a good
> calking next spring will solve the problem.
> 
> I can see all the rivets and thru bolts in the Genoa track area.
> Water seems to be leaking in a few spots actually running down the length of
> certain rivets.

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------




 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1066790154.0