[Public-list] Boat Trim

[Roger L. Kingsland]

Thanks Michael,

I recall seeing something like that (that I thought was just some dufis
scratching the hull) and will look more closely.  I recall, with the current
boot stripe, the entire stripet was out of the water with more bottom paint
showing forward (which I thought looked pretty good).  Given the volume of
stuff I took out of the aft lockers (enough oil for at least 5 oil changes,
3 cased of bottles and cans, assorted non-matching fenders, an old couch,
three tricycles; wait, I think I might be commingling with the time I
cleaned out the garage), it wouldn't surprise me if the stripe was
originally parallel to the water.

Roger

----- Original Message ----- 
From: <dickdurk at intercom.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Friday, August 20, 2004 4:40 PM
Subject: Re: [Public-list] Boat Trim


> Roger
>
> On Checkmate there is (or was) a scribe mark that looked to be part of the
> original mold; it was gel coated anyway. It wouldn't take much sanding to
> smooth that mark away.
>
> Anyway, I raised my waterline 1" above that mark and went from there; the
boat
> seems to ride right on that original mark when she is emptied of "junk".
>
> I found that scribe mark prepping the hull the first time I did a soup to
nuts
> paint job-bottom, boot stripe, and topsides.
>
>
> Michael Grosh
>
>
>
> ------------------------------------------------------
> This message was sent using Delmarva Online's Webmail.
> http://www.dmv.com/
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
>



 1093037176.0