[Public-list] thru hulls

[Todd Redhead]

Dan,

That does not sound good to me - if I were you I would keep a hammer and
some tapered wood plugs handy if I were going to touch that valve again.  Of
course if you are on the hard - then don't worry about it.  The repair is
easy - just replace the gate valves and through hulls.  I did mine last
winter/spring - took a total of about 1 full day with my 1st mate. (wife).

Todd

----- Original Message ----- 
From: "Daniel Walker" <DWalker at cemcocpa.com>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Tuesday, July 13, 2004 11:27 AM
Subject: [Public-list] thru hulls


as a firm believer in "if it ain't broke, don't fix it". , i violated that
rule after three years of hearing REPLACE THE GATE VALVES.
so, it was midnight and dark and as i turn a gate valve with my handy dandy
pipe wrench, and notice the thru hull turning. in the dark it doesn't appear
broken, but would this be a candidate for the whitby do it yourself thru
hull fitting that all advise to replace?
dan
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

__________ NOD32 1.742 (20040428) Information __________

This message was checked by NOD32 Antivirus System.
http://www.nod32.com



 1089773438.0