[Public-list] Alcohol Stove

[Todd Redhead]

Thanks Scott,

The tank will hold pressure if pressurized - I managed to get the pump to
'catch' a couple of times and the tank did pressurize.  The main problem is
that most of the time the pump pushes down without any air going into the
tank.

Todd

----- Original Message ----- 
From: "William Wallace" <tristan at one.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Monday, June 21, 2004 10:26 PM
Subject: Re: [Public-list] Alcohol Stove


> Hi Todd,
>
> Check your tank cap gasket...
>
> Scott
> On Monday, June 21, 2004, at 10:23 PM, Todd Redhead wrote:
>
> > Hello All,
> >
> > I'm having a problem with my alcohol stove - a Homestrand.  I can't
> > seem to prime the pump.  I'm used to a campstove that had a pump with
> > a leather O ring but this one is rubber.  It just does not seem to be
> > tight enough to pressurize the tank.  It was working properly for the
> > winter and the spring but now - its not.  Anyone have any ideas?
> >
> > Thanks,
> >
> > Todd
> > _______________________________________________
> > Public-list mailing list
> > Public-list at alberg30.org
> > http://alberg30.org/mailman/listinfo/public-list
> >
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
> __________ NOD32 1.742 (20040428) Information __________
>
> This message was checked by NOD32 Antivirus System.
> http://www.nod32.com
>
>


 1087871719.0