[Public-list] main beam repair

[C.B. Currier]

When I did Infinity's mast beam I had several bolts that I removed once
the Beam as fully jacked up. This makes the joint between the wood and
aluminum clean and tight for your epoxy or caulking material. When I put
then new bolts in I tried to replace the new bolts as closely as possible
to the prevouis ones were.

BTW: Remove the bolts after the mast is jacked.Less torque on the bolts &
they should come out clean then.

-- 
C.B. Currier
Infinity # 57
Daybreak #458


Ross Horton said:
> I am in the process of installing the two aluminum plates to sister the
> main
> laminated wooden beam in Delphi.  Is it necessary or desirable to remove
> the
> existing bolts between the bulkhead and the beam before, or during,
> jacking
> up the beam and installing the plates?
>
>
>
> Ross Horton
>
> Delphi #40
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>


 1088502951.0