[Public-list] main beam repair

[Mike Lehman]

Yes - that is the short answer. You will remove the bolts, jack up the beam, 
then replace the bolts with larger 5/16" that are not threaded all the way 
to the head. Use the same holes.



Mike Lehman
"Gilleleje" #505

~~~_/)_/) ~_/) ~~





----Original Message Follows----
From: "Ross Horton" <rosshorton at comcast.net>
Reply-To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
To: <public-list at alberg30.org>
Subject: [Public-list] main beam repair
Date: Thu, 24 Jun 2004 20:18:58 -0400

I am in the process of installing the two aluminum plates to sister the main
laminated wooden beam in Delphi.  Is it necessary or desirable to remove the
existing bolts between the bulkhead and the beam before, or during, jacking
up the beam and installing the plates?



Ross Horton

Delphi #40

_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list



 1088513275.0