[Public-list] #306 Gary Barker #563

[CAPTDAVE40 at aol.com]

In a message dated 10/7/2004 9:39:17 AM Eastern Daylight Time, 
gbarker at swfla.rr.com writes:
Dave,
Glad to hear your boat survived. Mine fell over in a boatyard during
Charley, and as with yours, I suffered no hull damage, just bent mast,
broken rigging. There is a lot to be said for a solid fiberglass hull!

Mast measurements on my A30 #563 is 34 ft 4 in high, not including masthead 
casting.  Cross section is 3.5 in x 6 in. Extrusion is 5/32 in thick. I hope
this helps.

Gary Barker
Blarney #563
Thank you so much Gary!
Just what I needed for the rigger down on Grenada.
Sounds like we are in the same WX boat, (PTP). 
Good luck with your refit also.
Best regards, Dave Ferneding
COOBER PEDY #306