[Public-list] Lexan or Acrylic ?

[Gary Barker]

I used Lexan UV resistant, scratch resistant from Plastics Supply , 
Manchester, New Hampshire  www.plasticsupply.com.  Expensive, but what 
the hey?

Gary Barker
BBH, Maine
#307


On Thursday, Sep 23, 2004, at 12:13 US/Eastern, David Timmins wrote:

> Hi Guys.
> We are having a great debate regarding the best material for port-light
> replacement on the Alberg 22 Newsgroup.
> Some say Lexan, some, including me, say Acrylic.
> I redid my port-lights using 3/8" Acrylic 5 years ago and here are my 
> reasons
> for choosing this material.
> For it's great strength, I considered using Lexan for my port-lights 
> on Elusive, but
> decided against it for the following reasons.
> 1) Alberg 22 ports do not cover a large in area so the high strength
>     of Lexan is of less importance
> 2) Lexan does scratch easier than Acrylic.
> 3) Scratches that do occur in Acrylic can be polished out.
> 4) Lexan has a limited life in the sun and will yellow, yellowed 
> Acrylic
>      can be rejuvenated.
> Some AL22 have have their port-lights mounted on the outside of the
> cabin sides, without bezels. I would be more inclined to use Lexan in 
> these cases.
> Lexan drills very well as opposed to Acrylic which chips easily and  
> will usually
> crack at the drill hole.
> Anyone want to jump in on this?
>
> David Timmins
> Elusive, AL 22
>
>
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>


 1095983055.0