[Public-list] Lexan or Acrylic ?

Tue Sep 28 09:43:17 PDT 2004

James,

I suggest taking them all out and comparing for size differences.  No need
to make templates, just send originals and only those that differ in size.
Fell free to reply to rkingsland101 at ksba.com.

Roger

Roger L. Kingsland, AIA
Managing Partner
Kingsland Scott Bauer Associates (KSBA)
N40° 27' 49"  W79° 57' 59"
3441 Butler Street
Pittsburgh, PA 15201
www.ksba.com

1(412) 252-1500 X101 - Office & Voice Mail
1(412) 779-5101 - Mobile (no voice mail)
1(412) 252-1510 - Fax

----- Original Message ----- 
From: "James Schueler" <jschueler at familyempowerment.org>
To: "'Alberg 30 Public List -- open to all'" <public-list at alberg30.org>
Sent: Tuesday, September 28, 2004 11:02 AM
Subject: RE: [Public-list] Lexan or Acrylic ?

> Roger,
>
> After reading some of the other comments I suppose I will should send
> you the templates. After the boat is out of the water I'll take the
> lights out, make templates, and then send them to you if that's ok. It's
> likely that #148 and #170 are the same but.....
>
> As far as the cradle is concerned, because I never use a spinnaker (that
> may be a little strange but then I might be also, or so some have
> implied) I am thinking of mounting the base of the cradle on the bases
> of the aft winches and just doing away with them for the time being. No
> point in having them there if I never use them. This also eliminates the
> need to mount anything to the deck; I don't like drilling holes in my
> boat if I don't have to.
>
> I'll let you know when I get the lights out.
>
> Thanks,
>
> James Schueler
> "Oddyseus" #170
>
>
>
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of Roger L.
> Kingsland
> Sent: Tuesday, September 28, 2004 10:35 AM
> To: Alberg 30 Public List -- open to all
> Subject: Re: [Public-list] Lexan or Acrylic ?
>
> James,
>
> I will contact my Lexan guy and confirm price and smoke.  Cost to UPS 10
> pounds (guess) to Middletown is under $6.  Do you want to send me
> templates
> from your boat or have him use mine from #148?  All of my small and
> large
> lights are the same size.
>
> I have not done a boom crutch but have thought of doing a folding one
> (upside down V) with the legs resting on either the aft ends of the
> cockpit
> seats or the outside sides of the aft end of the cockpit sole.  Former
> would
> allow better access to the poop deck but may have stability problems.
> Both
> would impair access to lazarette.
>
> I to would like to hear from those who have been there (since I, for
> now, am
> just a would like to go there guy ).
>
>
> Roger L. Kingsland, AIA
> Managing Partner
> Kingsland Scott Bauer Associates (KSBA)
> N40° 27' 49"  W79° 57' 59"
> 3441 Butler Street
> Pittsburgh, PA 15201
> www.ksba.com
>
> 1(412) 252-1500 X101 - Office & Voice Mail
> 1(412) 779-5101 - Mobile (no voice mail)
> 1(412) 252-1510 - Fax
>
>
> ----- Original Message ----- 
> From: "James Schueler" <jschueler at familyempowerment.org>
> To: "'Alberg 30 Public List -- open to all'" <public-list at alberg30.org>
> Sent: Tuesday, September 28, 2004 10:13 AM
> Subject: RE: [Public-list] Lexan or Acrylic ?
>
>
> > Roger,
> >
> > I'd be interested if you don't mind. I would like smoked lexan
> > instead of clear and would need to know the shipping charges to
> > Middletown, NY. That's about 70 miles north of NYC.
> >
> > Also, has anyone ever made a cradle for the boom? Before I try
> > to come up with a workable design I'd like to hear from other
> Albergers
> > who may have already built one or decided against it.
> >
> > Thanks,
> >
> > James Schueler
> > "Oddyseus" #170
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: public-list-bounces at alberg30.org
> > [mailto:public-list-bounces at alberg30.org] On Behalf Of Roger L.
> > Kingsland
> > Sent: Tuesday, September 28, 2004 9:50 AM
> > To: Alberg 30 Public List -- open to all
> > Subject: Re: [Public-list] Lexan or Acrylic ?
> >
> > This summer I had a local glass company make new port lights with 1/4"
> > lexan
> > (I did clear but it also comes in colored tints) using the old ones as
> a
> > template.  He did all eight for about $110 plus 7% tax.  I would be
> > happy to
> > ask him to make more if anyone is interested.
> >
> > Roger
> >
> > Roger Kingsland
> > Chief Boat Boy
> > PERFECT intentions, A30 #148
> > on the hard at N40° 33.945' W79° 51.260'
> >
> > Author's Disclaimer; This email was produced exclusively by the sender
> > and,
> > in the interest of expediency, without the benefit of editing by
> others.
> > The sender, thank goodness, is a much better architect/sailor than
> > speller/editor and, frankly, constantly laments an obvious flaw in
> > "spell
> > check," it does not know what the author is thinking.  Please accept
> the
> > sender's sincere apologies for any "typos" that may appear in this
> > document.
> > If present, they are certainly unintended and hopefully do not cloud
> the
> > message, or spawn any unnecessary lawsuits.
> >
> >
> > ----- Original Message ----- 
> > From: "George Dinwiddie" <gdinwiddie at alberg30.org>
> > To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
> > Sent: Tuesday, September 28, 2004 9:18 AM
> > Subject: Re: [Public-list] Lexan or Acrylic ?
> >
> >
> > > One of these days I'll write up the portlight replacement we did at
> > the
> > > Spring Maintenance Rendezvous.
> > >
> > > On Mon, Sep 27, 2004 at 05:17:15PM -0400, David Timmins wrote:
> > > >  Thanks everyone for your input, looks like a even split
> > > > between the two materials. I have posted a sampling of
> > > > your comments to the Alberg 22 Group. They can draw
> > > > their own conclusions and chose the material that they feel
> > > > most comfortable using.
> > > > A ban saw is defiantly the tool of choice when cutting acrylic
> > > > When a full sized sheet has to be ripped, I've noticed my guys
> > > > raising the table saw blade to it's full height to help dissipate
> > > > the heat.
> > > > I think that I have this group to thank for the "three tape"
> method
> > > > of bedding... pretty sure I read it here.
> > > > I used that system with great success when bedding my
> > > > port-lights and again, more recently, while re-bedding all my deck
> > > > hardware during
> > > > Elusive's refit.
> > > > If I'm mistaken about the source of this information , let me know
> > and
> > > > I'll
> > > > post it... saved me from getting silicone and bedding material
> over
> > > > everything.
> > > > David Timmins
> > > > Elusive AL 22
> > > _______________________________________________
> > > Public-list mailing list
> > > Public-list at alberg30.org
> > > http://alberg30.org/mailman/listinfo/public-list
> > >
> > >
> >
> >
> > _______________________________________________
> > Public-list mailing list
> > Public-list at alberg30.org
> > http://alberg30.org/mailman/listinfo/public-list
> >
> > _______________________________________________
> > Public-list mailing list
> > Public-list at alberg30.org
> > http://alberg30.org/mailman/listinfo/public-list
> >
>
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
>

 1096389797.0