[Public-list] Epoxy Vs. Polyester resin
George Dinwiddie
gdinwiddie at alberg30.org
Sat Oct 1 08:41:47 PDT 2005
Patty J wrote:
> Katrina took my cap rail off and ripped some of my deck to hull joint.
> Does any one know what I should use to make my repairs...epoxy or
> polyester resin with the fiberglass. I've already read Don Casey's book
> on the subject and I'm ready to start grinding but want to use the
> correct materials. The only part that was ripped off is the deck part
> just under the cap rail and it looks to me like they used fiberglass
> mess and sheeting sandwiched together, so I suspect they used polyester
> resin, but not sure.
Yes, Whitby used polyester resin. Personally, I recommend using
polyester resin for the repairs. Epoxy has advantages and
disadvantages. It is chemically adhesive, where polyester depends on a
physical bond (which you get by grinding an 8-to-1 scarf). It's also
unstable in UV and will break down much faster than polyester if not
kept painted. And, the chemistry requires a much more careful mix. You
can adjust the working time of polyester by using more or less hardener
(to a point), but epoxy will become brittle or lose its strength if not
mixed right. I think epoxy takes more skill to layup than polyester,
also. Also, you can apply epoxy to polyester, but not the other way
around. So an epoxy patch will require epoxy in the future, or a bigger
grinding job.
Except for small repairs where the adhesiveness of epoxy was a
significant advantage, I use polyester.
I do recommend using a respiration mask and nitrile gloves.
- George
--
----------------------------------------------------------------------
When I remember bygone days George Dinwiddie
I think how evening follows morn; gdinwiddie at alberg30.org
So many I loved were not yet dead, http://www.Alberg30.org
So many I love were not yet born.
'The Middle' by Ogden Nash
----------------------------------------------------------------------
1128181307.0
More information about the Public-List
mailing list