[Public-list] Chainplates/bolts

[John Boor]

>  
> Hi John,
> Thx John. Do you a shop with the right tools to work with
> SS? I've found   it's pretty tough to cut and drill with
> the stuff I have. :)
>  
> Lee
>Lee
When I did my refit I worked at a friends house who was also
refitting his Alberg.  He has a reasonable fitted out shop
where I did the drilling, and as  you state it was tough
going.  I did find some drills for SS drilling and these
worked well, the only problem is I cannot remember where I
purchased them from ( old timer's I guess).

All the best 
John Boor
MAHSEER #380

> Sorry for the delay This is our thanksgiving in Canada.  
> I made the chainplates out of 1/4 SS bar stock and used
> the old ones as  a template.
> John Boor
> MAHSEER 
> #380_______________________________________________
> 
> 
>  
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

 1129296400.0