[Public-list] bronze rudder post replacement

[brooks.glenn at comcast.net]

Hi George,

Thanks very much for your reply.  Gives me a little more confidence I can open up the existing assembly and reuse it. I am just ready to open up the rudder around the lower shaft tomorrow.  I did read your on-line coments and looked at the different rudder photos--very helpful

Can you comment on how many longitudinal pins were holding your shaft tight with the foam core, and perhaps what size and length they were?

Thanks

Glenn


 -------------- Original message ----------------------
From: George Dinwiddie <gdinwiddie at alberg30.org>
> brooks.glenn at comcast.net wrote:
> 	[snip]
> > Can anyone suggest the best way to do this?
> 
> I don't know if it's best, but my approach is included in the 
> Maintenance Manual.  Basically I chiseled out the foam and removed the 
> lower post, which was in a condition similar to yours.  I had it cut 
> off, drilled and tapped.  I then put it back in the rudder with glass 
> and epoxy and filled the voids with thickened epoxy.
> 
> > PS,  I really don't want to go stainless as the pintels and shoe are
> > in excellent condition, and the rudder post mounted in the hull is
> > bronze.
> 
> You really don't want to use stainless below the waterline.  See 
> http://alberg30.org/maintenance/Steering/CreviceCorrosion/
> 
> -- 
>   ----------------------------------------------------------------------
>    When I remember bygone days                         George Dinwiddie
>    I think how evening follows morn;            gdinwiddie at alberg30.org
>    So many I loved were not yet dead,           http://www.Alberg30.org
>    So many I love were not yet born.
>                 'The Middle' by Ogden Nash
>   ----------------------------------------------------------------------
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list



 1161054329.0