[Public-list] insulating the ice box

David Terrell DTERRELL at message.nmc.edu
Fri Sep 8 07:57:06 PDT 2006


thanks.

>>> "David Parkes" <davidparkes at ns.aliantzinc.ca> 09/07/06 8:56 PM >>>
Good plan.  By the way, in my original message for "moralised
insulation" 
read "metalised insulation", i.e. reflective.

----- Original Message ----- 
From: <mainstay at csolve.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Thursday, September 07, 2006 9:29 PM
Subject: Re: [Public-list] insulating the ice box


>I did that; and for the same reason.  I glued a reflective and
> insulative layer of motor box insulation to the face adjoining the
> engine compartment.  I would also like to put in a metal heat sheild
on
> the riser and elbow.
>
> Gord #426
>
> -----Original Message-----
> From: "David Parkes" <davidparkes at ns.aliantzinc.ca>
> To: "Alberg 30 Public List -- open to all"
<public-list at alberg30.org>
> Date: Thu, 7 Sep 2006 21:23:01 -0300
> Subject: Re: [Public-list] insulating the ice box
>
>> During the trip on "Sapphira" we noticed that the ice box worked
well
>> while
>> sailing but poorly while motoring (we motored a lot on the
Richelieu
>> River).
>> If I were to keep the boat I would install moralised insulation in
the
>> engine compartment between the exhaust elbow and the wall of the
ice
>> box.
>> David Parkes
>> Alberg 30 #417.
>>
>> ----- Original Message ----- 
>> From: "David Terrell" <DTERRELL at message.nmc.edu>
>> To: <public-list at alberg30.org>
>> Sent: Thursday, September 07, 2006 3:30 PM
>> Subject: [Public-list] insulating the ice box
>>
>>
>> >I am interested in improving my ice box this winter. I have read
the
>> > maintenance manual and looked up the topic on the web site under
>> several
>> > headings and churned up additonial material. Having done that it
>> would
>> > help to have further  ( any maybe more recent ) descriptions of 
how
>> > people have upgraded their ice boxes by improving the insulation.
>> >
>> > I am also interested in hearing from those who have installed
>> > regrigation as well. It seems to me that doing this would only
make
>> > sense if one had fixed the insulatiioin problem first.
>> >
>> > Finally, Ray Marks (august 1984) said that his insulation job
>> improved
>> > the function of the ice box but speculated that if the whole box
were
>> > taken apart, a better job could be done. Has anyone taken this
route?
>> If
>> > so, how was the task accomplished? with what results?
>> >
>> > Thanks fro any and all help.
>> >
>> > David, 432
>> > _______________________________________________
>> > These businesses support your Association:
>> > http://www.alberg30.org/store/A30supporters.html 
>> > Please support them.
>> > _______________________________________________
>> > Public-list mailing list
>> > Public-list at alberg30.org 
>> > http://alberg30.org/mailman/listinfo/public-list 
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html 
>> Please support them.
>> _______________________________________________
>> Public-list mailing list
>> Public-list at alberg30.org 
>> http://alberg30.org/mailman/listinfo/public-list 
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html 
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org 
> http://alberg30.org/mailman/listinfo/public-list 

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html 
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org 
http://alberg30.org/mailman/listinfo/public-list

 1157727426.0


More information about the Public-List mailing list