[Public-list] pulpit

Gordon Laco mainstay at csolve.net
Wed Jan 10 08:40:05 PST 2007


Hi there -

Your genny will pucker over the lifeline - but everybody has put up with
that since the mid 70's when dipped lifelines were outlawed by racing rules
that require lifelines.

We carry our spinnaker sheets looped around the upright and over the dipped
lifeline... That forces them to cross the big gap in the pulpit and
increases the security.  That is a practice that I learned crewing in my
younger days.  I have also pushed the forward anchor point of the lifeline
up as far as it will go given the length of the wire.  We have an
intermediate made of 3/16" braided line seized to the stanchions.  I didn't
want to get involved drilling the SS tubes - they aren't very thick walled
and aside from possibly weakening them I would have had to deal somehow with
the sharp edges...

With regard to the rail - that sounds like a very good design.

Gord


> Gord-
> 
> thanks for the comments. Very helpful. Just quick:
> 
> 1. The effect of the higher lifeline attachment on the foot of the 170 is
> EXACTLY what I am concerned about. I'm hoping that somebody on the list has
> a modern style pulpit with the higher lifeline attachment and can speak
> about this.
> 
> 2. The intermediate rail's primary benefit as I see it (and as my rigger
> sees it too) is stiffness. My intermediate rail will not go all the way
> around the bow. It will only go port & starboard from the 1 upright members,
> leaving the bow area open to allow space for the roller furler and for
> anchor handling.
> 
> later,
> 
> J
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1168447205.0


More information about the Public-List mailing list