[Public-list] Hot Epoxy in the bilge

Gordon Laco mainstay at csolve.net
Fri Jan 19 07:02:31 PST 2007


Just to further complicate the discussion...

Common practice in commercial vessels and wooden yachts is to pour hot
roofing tar into inaccessible spaces like the bilge above the heel of the
keel...

Gord #426 Surprise





>> David -
>> You will find that the bilge is about an arms length deep and narrows to
> the stern to about 2in wide not very conducive for a grinder. While you
> are down there check the aft floor stringer for rot, I had to replace it
> and the battery box floor.
> 
> John Boor
> MAHSEER #380
>> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1169218951.0


More information about the Public-List mailing list