[Public-list] Spreader replacement
Mike Lehman
sail_505 at hotmail.com
Sat Jan 20 09:46:11 PST 2007
Alex
I just measured my old ones (I replaced the original ones about 20 yeas
ago). My boat is #505 and the spreaders are 1.75" x 36". The old ones were
1/16" wall thickness and I went to 1/8". I used 6061. I did this after
witnessing, first hand, a speader failure on 527 and the resulting
dis-masting. There is evidence that not all the boats are the same, so it is
best to measure yours carefully before buying replacement tubing. Mine were
a sloppy fit in the socket, as was the case with 527. This caused the
spreaders to move around and the SS socket wore a groove in the bottom of
the speader. It almost cut all the way through. That's why I replaced them.
Hope this helps - did you get your builder's plate?
Mike Lehman
~~~_/)_/)~~_/)~~~
----Original Message Follows----
From: Alexei Kassatkin <kasatka1 at suddenlink.net>
Reply-To: Alberg 30 Public List -- open to all
<public-list at lists.alberg30.org>
To: public-list at lists.alberg30.org
CC: Alexei Kassatkin <kasatka1 at suddenlink.net>
Subject: [Public-list] Spreader replacement
Date: Fri, 19 Jan 2007 21:50:25 -0800
Hello,
I'm a new Alberg 30 owner beginning a refit of "Blue Heron" #455.
Can anyone provide me with the tube dimensions for the original
spreaders. MIne appear to be original - 1.75", or 44mm round aluminum
tubing, which is badly corroded at both the tips and at the connection
point to the mast - in definite need of replacement. I'd appreciate
any recommendations on which type of aluminum (6061, 6060 or 6063)
would be appropriate and how to isolate the spreaders from the ss
mount on the mast. I've enjoyed reading this forum, and thank you
for any input you may have.
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
public-list mailing list
public-list at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_________________________________________________________________
Type your favorite song. Get a customized station. Try MSN Radio powered
by Pandora. http://radio.msn.com/?icid=T002MSN03A07001
1169315171.0
More information about the Public-List
mailing list