[Public-list] Shaft Coupling
marco lavoie
marcolavoie at msn.com
Mon Jun 4 10:20:35 PDT 2007
Hello John,
There is usualy two set scews on the coupling at 90 deg.from each
others.
You may try to drill them out firt before try to use a puller. I've
replace mine with stailess screws.
Marco.
______________________________________________________________
From: Coolray <cooler2k at yahoo.com>
Reply-To: Alberg 30 Public List -- open to all
<public-list at lists.alberg30.org>
To: Public List A30 <public-list at alberg30.org>
Subject: [Public-list] Shaft Coupling
Date: Mon, 4 Jun 2007 10:09:27 -0700 (PDT)
>A30s,
>
>This weekend I removed my prop, shaft & rudder. I had
>previously removed the engine. I pulled the shaft
>forward through towards the cabin because the coupling
>is rusted/frozen to the shaft. I may have to cut the
>coupling off the shaft, but will try a hub puller
>first. Question. It looks like I have the remnants of
>a locking set screw or bolt protruding from the side
>of the coupling. It is completely deteriorated so I
>cannot tell. This will impact my success with a hub
>puller/shaft puller. I see the key and key way, but
>this is a rusted nub protruding perpendicular to the
>shaft and sticking out the side of the coupling. Does
>anyone have previous experience with this coupling.
>Mine is a four hole with no vibration or flex
>component.
>
>Thank you,
>John Cooler
>Atalaya, #087
>
>
>
>
>__________________________________________________________________
__________________
>Never miss an email again!
>Yahoo! Toolbar alerts you the instant new Mail arrives.
>http://tools.search.yahoo.com/toolbar/features/mail/
>_______________________________________________
>These businesses support your Association:
>http://www.alberg30.org/store/A30supporters.html
>Please support them.
>_______________________________________________
>public-list mailing list
>public-list at lists.alberg30.org
>http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
1180977635.0
More information about the Public-List
mailing list