[Public-list] Cockpit drains above water line

J Bergquist jbergqui at gmail.com
Wed Mar 14 07:37:46 PDT 2007


Roger,

the tubes are called 'pitot tubes' I guess they're named for Mr (or
Ms.) pitot. But I don't know that...

I think you'd be better off with an Elvstrom style bailer than a pitot
tube, but personally I don't think either is really worth the trouble.
The elvstrom bailers have a little door that prevents water from
coming back in if you are going too slow for them to work.

The Elvstrom-style bailers are pretty common in dinghies and work
well. I have them in my laser and my 5o5. In the 5o5 they are
remarkably effective. I have capsized that boat and gotten upright
with a boat full of water and had the boat dry after only a couple
minutes of sailing because they suck the water out so fast (note you
need a lot of breeze for this to work...) I particularly remember one
badly botched gybe in San Francisco last summer where we were dry
within what seemed like 30 seconds after getting the spinnaker full.

I have noticed that people use them in Soling and Etchells too. So
they clearly must work for displacement sailing also...

I have also seen them in rowing shells where they work nicely.

Later,

J

On 3/14/07, J Bergquist <jbergqui at gmail.com> wrote:
> Rachel-
>
> If you check out:
>
> http://www.lackeysailing.com/kaholee/kaholee.htm
>
> There are some great pix of someone replacing cockpit drains on a
> Pearson Triton. In particular,
>
> http://www.lackeysailing.com/kaholee/march2007/30707.htm
>
> Is a good link. But the whole project diary is interesting and the
> cockpit drains are referenced or discussed on several of the pages.
>
> Later,
>
> J Bergquist
>
> On 3/14/07, John Boor <mahseer at kos.net> wrote:
> > I have installed drains at the aft end of the cockpit and like the results.
> > I used the existing "T" to join them together on each side,then rerouted
> > the deck drains into the origional bilge and engine exhaust through hulls.
> >  I then installed 2 new fitting on the transom for the bilge and exhaust.
> >
> > John Boor
> > MAHSEER #380
> >
> >
> >
> >
> > > Roger,
> > >
> > > I like the idea of having aft drains in the cockpit. I have been reluctant
> > > to do this because I hate to cut more holes in the boat. Another though
> > > was
> > > to "T" them into the forwar drains, but then you are limited by the single
> > > thru-hull fitting serving 2 drains, so that did not make much sense
> > > either.
> > > Ater owning my boat for 30 years, I still have not done this...and I have
> > > filled the cockpit on more than one occasion, not intentionally.
> > >
> > >
> > >
> > > Mike Lehman
> > > ~~~_/)_/)~~_/)~~~
> > >
> > >
> > >
> > >
> > > ----Original Message Follows----
> > > From: "Roger L. Kingsland" <r.kingsland at ksba.com>
> > > Reply-To: Alberg 30 Public List -- open to all
> > > <public-list at lists.alberg30.org>
> > > To: "Alberg 30 Public List -- open to all"
> > > <public-list at lists.alberg30.org>
> > > Subject: Re: [Public-list] Cockpit drains above water line
> > > Date: Wed, 14 Mar 2007 04:58:23 -0400
> > >
> > > Hi Rachael,
> > >
> > > I haven't tried it but am glad you asked because I thought about a similar
> > > arrangement only locating the drains at the aft corners and running them
> > > horizontally (or slightly downward) straight aft through the lazarette.
> > > It
> > > might be possible to glass in some kind of flange at the bottom corners of
> > > the lazarette bulkhead (tangent to the cockpit floor) which would get the
> > > hoses a little higher.  To get drainage while healed, I think it would be
> > > necessary to, A) have two exit points with each slightly below and
> > > outboard
> > > of the outboard edge of the cockpit floor; or B),  have a combined exit at
> > > the centerline low enough that it is below the outboard edge of the
> > > cockpit
> > > when the boat is fully healed.  I have a plan to make the lazarette
> > > watertight from the rest of the boat (and perhaps self draining) so if
> > > this
> > > type of drain leaked it wouldn't fill the boat and cause a potential
> > > "glug,
> > > glug".  I don't know if there would be any problem with backwash in a
> > > following sea.  One plus would be the hoses could be much bigger allowing
> > > the cockpit to drain faster.  Of course, Gord Laco seems to have the
> > > fastest
> > > cockpit draining technique of all.  Just put the spreaders in the water
> > > and
> > > let it pour out over the combings.
> > >
> > > Roger 148
> > >
> > > ----- Original Message -----
> > > From: "Rachel" <penokee at cheqnet.net>
> > > To: "Alberg 30 Public List -- open to all"
> > > <public-list at lists.alberg30.org>
> > > Sent: Wednesday, March 14, 2007 12:02 AM
> > > Subject: [Public-list] Cockpit drains above water line
> > >
> > >
> > >  > Hi folks,
> > >  >
> > >  > I'll be replacing my cockpit drain plumbing soon - I plan to remove the
> > >  > current gate valves and through hulls.  I'm pretty sure I'll also
> > >  > replace the drains in the corners of the cockpit with larger ones - the
> > >  > originals look to be 1" or slightly less.  I like the 1-1/2" bronze
> > >  > Perkos (installed them on another boat), but will have to make sure the
> > >  > above deck flange fits - I think it will.
> > >  >
> > >  > Anyway, on to my real question:  I'm thinking about plumbing the
> > >  > cockpit drains so they exit above the waterline, and I'm wondering if
> > >  > anyone else has done that.  I did search the list archives and find a
> > >  > couple of posts from 2002, in which the idea was discouraged, but
> > >  > nothing since then.
> > >  >
> > >  > I've nothing against through-hulls in general, as I believe that good
> > >  > quality seacocks, well-installed, are fine.  On the other hand, cockpit
> > >  > drain seacocks are the one case in which you cannot close the seacock
> > >  > when the boat is unattended, and certainly no seacock is as safe as a
> > >  > solid spot of glass in the hull :-)
> > >  >
> > >  > Crude measurements show that there is probably something like 8+" from
> > >  > the cockpit drain holes to the resting waterline.
> > >  >
> > >  > I did quite a bit of cruising on a boat that had the cockpit drains
> > >  > exiting above the waterline (not an A-30), and it worked pretty well.
> > >  > They left the cockpit in the front corners - like on our boats - and
> > >  > then hoses ran aft and exited the hull on the transom near centerline;
> > >  > in this way they avoided the problem of dipping below the waterline
> > >  > when heeled.  As a side bonus, the deep (below waterline) galley sink
> > >  > drained by being pumped into one of the scupper lines (with a manual
> > >  > bilge pump).
> > >  >
> > >  > I may very well replace the original set-up (but with better parts and
> > >  > larger lines), but there's no harm in exploring other possibilities in
> > >  > theory, anyway.  Has anyone run their cockpit drains the way I'm
> > >  > describing?
> > >  >
> > >  > Thanks,
> > >  >
> > >  > Rachel
> > >  > 1967 Alberg 30, #221
> > >  >
> > >  > _______________________________________________
> > >  > These businesses support your Association:
> > >  > http://www.alberg30.org/store/A30supporters.html
> > >  > Please support them.
> > >  > _______________________________________________
> > >  > public-list mailing list
> > >  > public-list at lists.alberg30.org
> > >  > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >  >
> > >
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > public-list mailing list
> > > public-list at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > > _________________________________________________________________
> > > Find a local pizza place, movie theater, and more….then map the best
> > > route!
> > > http://maps.live.com/?icid=hmtag1&FORM=MGAC01
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > public-list mailing list
> > > public-list at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > public-list mailing list
> > public-list at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>

 1173883066.0


More information about the Public-List mailing list