[Public-List] Rudder problem

[Brian Hofler]

I purchased one from Edson two years ago...Just went to the catalogue...two
sizes I believe but one specifically for Alberg 30. Fit perfectly not
problems...

Brian - #496

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org]On Behalf Of Mark Dietrich
Sent: Monday, April 07, 2008 11:34 AM
To: Alberg 30 Public List -- open to all
Subject: [Public-List] Rudder problem


I have a slight problem with my tiller attachment to the rudder post on St
Judith  #531.
  The fitting that has a keyway and slides onto the rudder post is cracked
where the bolt goes through in the back.  Any idea where I could get a
replacement for this fitting?  I discovered the crack when I was trying to
get some of the play out of the tiller by inserting a shim between this
fitting on the top of the rudder post and the H fitting on the tiller.
  Thanks,
  Mark
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.8/1363 - Release Date: 4/7/2008
8:56 AM

No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.8/1363 - Release Date: 4/7/2008
8:56 AM


 1207616558.0