[Public-List] Vent Fittings for Holding Tank Installation

[mahseer at kos.net]

Am I different or is this normal.  On year 1969 380 my wast tank vent exit
through the deck at the mast base and is vented into the mast this results
in no odor at all.

John Boor
MAHSEER #380


> milleype at kingston.net wrote:
>> Can any one who has installed a holding tank recommend a supplier for
>> the
>> vent fittings for the two 3/4" ID vent hoses that run forward to the
>> bow.
>> I have checked the obvious supply catalogues, West Marine, etc. and see
>> none listed.
>
> I think I got the plastic fittings for the tank end at Home Depot or
> Lowes.  As Mike says, the fittings on the hull are fuel vents.
>
>   - George
>
> --
>   ----------------------------------------------------------------------
>    When I remember bygone days                         George Dinwiddie
>    I think how evening follows morn;            gdinwiddie at alberg30.org
>    So many I loved were not yet dead,           http://www.Alberg30.org
>    So many I love were not yet born.
>                 'The Middle' by Ogden Nash
>   ----------------------------------------------------------------------
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1209077691.0