[Public-List] David Re: water tank

[dickdurk at atlanticbb.net]

#220 has an aluminum fitting under the port FD bunk where 
all fill and discharge hoses lead.

Also Community water tanks are epoxy coated. It's non 
toxic after curing. Gel coat wouldn't be as good for your 
application because it is very brittle and thin-but I am 
not a big fan of gel coat for anything.

MichaelGrosh
#220


On Wed, 18 Jun 2008 11:20:12 -0400
  "William Newman" <newman423 at sympatico.ca> wrote:
> David,
> 
> Thank you for the response.  It sounds like your tank is 
>a later version 
> with the aluminum top.  Mine is all fibreglass and was 
>totally sealed until 
> I cut an inspection port.  Your expoxy coating is 
>interesting and I will 
> look into that.  I also may try painting on gelcoat over 
>the cracks because, 
> I believe that the cracks are superficial.  My access is 
>only 6 inches so I 
> can neither reach or see the whole tank.  It worth a try 
>though before 
> proceeding with more drastic alternatives.
> 
> Regards,
> 
> Bill Newman
> Marion Rose III
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1213830177.0