[Public-List] wood inset in hatches and seats

[Jacques TN]

We replaced the lazerette hatch, main hatch and seat with 1 inch teak.  We
routed out the old wood (plywood with teak laminate) and inlayed the new
teak.  The new teak is a bit higher and overlaps the fibreglass portions.
We can sand to our hearts content.

Kilwinning #446

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Mark Dietrich
Sent: June-22-08 9:48 PM
To: Public-List at lists.alberg30.org
Subject: [Public-List] wood inset in hatches and seats

Has anyone replaced the wood panels in the various locations on an Alberg?
The wood seems to be 1/4" Luann mahogany glued over 3/4" strips of plywood
with an 1/8" gap between them.  The 1/4" panel never cracked but looks old
and the top layer got sanded through.
I'd like to hear of any satisfactory results and also those that didn't work
out so well before I make my attempt.
Mark  531 
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.100 / Virus Database: 270.4.1/1513 - Release Date: 22/06/2008
7:52 AM


 1214190017.0