[Public-List] track car slides

Bill Woodford williamwoodford at charleswoodford.com
Wed Mar 5 05:58:37 PST 2008


Thank you to all who responded. I appreciate the input and I now have 
another project for the weekend.

Best regards,

Woody
---- Alberg 30 Public List -- open to all <public-list at lists.alberg30.org> 
wrote:
>
> John Maliszewski made a presentation on exactly this subject at the mtc.
> seminar. He had ordered some delrin spacers from McMaster Carr (
> www.mcmaster.com) and was going to use these. I thought it seemed like a
> very elegant solution...no rot, low friction, easy to machine.
> 
> Later,
> 
> JB
> 
> On Tue, Mar 4, 2008 at 10:32 AM, Jonathan Budington 
<jon at globalprinting.com>
> wrote:
> 
> > My oak shims rotted away under my genoa tracks.  I replaced them with
> > aluminum shims.  My local machine shop made them and drilled the holes
> > for about $200.
> >
> > Jon
> >
> > -----Original Message-----
> > From: public-list-bounces at lists.alberg30.org
> > [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Cole,
> > Andrew L
> > Sent: Tuesday, March 04, 2008 8:20 AM
> > To: public-list at lists.alberg30.org
> > Subject: Re: [Public-List] track car slides
> >
> > I used strips of teak cut to size on a table saw.  Take the track and
> > the car to the table saw and you can figure out how wide to make them so
> > they don't rub the car, and how thick to make it so the car doesn't
> > touch the deck.  I seem to recall the tolerances were just close enough
> > that I wouldn't try to cut the teak from measurements, I'm pretty sure I
> > had to shave it a couple times to get it just right without making it
> > too small.
> >
> > I don't see why you couldn't do it with Delrin instead, I just happened
> > to have some teak scraps laying around.
> >
> > Andrew Cole
> > Andante - 152
> >
> > >Date: Mon, 03 Mar 2008 10:21:31 -0500 (EST)
> > >From: Bill Woodford <williamwoodford at charleswoodford.com>
> > >Subject: [Public-List] track car slides
> >
> > >What is the preferred method for raising the track so that the car will
> > slide
> > >easily?  Thank you in advance for your suggestions.
> >
> > Cole, Andrew L
> > Admitted in Maryland, Virginia & Florida
> > One Corporate Center
> > 10451 Mill Run Circle, Suite 1000
> > Baltimore MD 21117
> >
> >
> > tel: 410 581-7408
> > fax: (410) 581-7410
> > mob: (410) 206-3577
> >
> > --------------------------------------------------------
> > This message contains confidential information and is intended only for
> > public-list at lists.alberg30.org. If you are not
> > public-list at lists.alberg30.org you should not disseminate, distribute or
> > copy this e-mail. Please notify andrew.cole at llff.com immediately by
> > e-mail if you have received this e-mail by mistake and delete this
> > e-mail from your system. E-mail transmission cannot be guaranteed to be
> > secure or error-free as information could be intercepted, corrupted,
> > lost, destroyed, arrive late or incomplete, or contain viruses. Cole,
> > Andrew L therefore does not accept liability for any errors or omissions
> > in the contents of this message, which arise as a result of e-mail
> > transmission. If verification is required please request a hard-copy
> > version.
> > --------------------------------------------------------
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> 
> 
> 
> -- 
> J Bergquist
> ----------------------------------------
> No News is Good News
> ----------------------------------------
> http://otziblog.blogspot.com
> ----------------------------------------
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 

 1204725517.0


More information about the Public-List mailing list