[Public-List] Shore Power, revisited

[Mike Lehman]

David,
 
I would simply draw a line around the existing hole and use a dremmel tool to grind to the new line. Mike Lehman  ><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>  > From: zira at bellsouth.net> To: public-list at lists.alberg30.org> Date: Tue, 10 Feb 2009 05:13:56 -0500> Subject: Re: [Public-List] Shore Power, revisited> > All -> > Thanks for the input. There were a couple consistent themes:> - Use GFCI outlets (or one & daisy chain). I was already planning to do > this.> - Hook in the battery charger. My second outlet is meant to service the > battery charger & provide power to the head area if needed> - Switch to a 30-amp inlet. OK, any suggestions on how to expand the > currrent inlet's 2-1/4" hole in the front wall of the cockpit to 2.8" that > Marinco says is needed for their 30-amp inlet? Even if I had a hole saw that > big, it would be a bear to drill it since there is no material for the > center bit to go through. I can borrow a jig saw but 2.8" is a pretty tight > radius.> > Agan, thanks for any help> > David Swanson> Strayaway Child> Alberg 30 #229 > > _______________________________________________> These businesses support your Association:> http://www.alberg30.org/store/A30supporters.html> Please support them.> _______________________________________________> Public-List mailing list> Public-List at lists.alberg30.org> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_________________________________________________________________
Windows Live™: E-mail. Chat. Share. Get more ways to connect. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_allup_howitworks_022009
 1234273398.0