[Public-List] Shore Power, revisited

[Rod Symmes]

David;
    You just jogged my memory...... I while back I saw a slick solution to that problem.  It was an extra long threaded mandrel for mounting hole saws.  First you would mount the larger [ 2.8" ] saw then inside that you mounted the 2-1/4"  saw and it would protrude enough to enter the old hole first and hold everything steady and centred while the larger saw did it's job.
Now if I could just remember where I saw that....... I would try Lee Valley Tools, for a start.

Cheers,    Rod

~~~~ _/)~~~ _/)_/) ~~~~
~~~~~~~~~~~~~~
   ~~    ~~~~~    ~~~~

  ----- Original Message ----- 
  From: Amy & David Swanson 
  To: Alberg 30 Public List -- open to all 
  Sent: Tuesday, February 10, 2009 5:13 AM
  Subject: Re: [Public-List] Shore Power, revisited


  All -

  Thanks for the input.  There were a couple consistent themes:
  - Use GFCI outlets (or one & daisy chain).  I was already planning to do 
  this.
  - Hook in the battery charger.  My second outlet is meant to service the 
  battery charger & provide power to the head area if needed
  - Switch to a 30-amp inlet.  OK, any suggestions on how to expand the 
  currrent inlet's 2-1/4" hole in the front wall of the cockpit to 2.8" that 
  Marinco says is needed for their 30-amp inlet? Even if I had a hole saw that 
  big, it would be a bear to drill it since there is no material for the 
  center bit to go through.  I can borrow a jig saw but 2.8" is a pretty tight 
  radius.

  Agan, thanks for any help

  David Swanson
  Strayaway Child
  Alberg 30 #229 

  _______________________________________________
  These businesses support your Association:
  http://www.alberg30.org/store/A30supporters.html
  Please support them.
  _______________________________________________
  Public-List mailing list
  Public-List at lists.alberg30.org
  http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.0.233 / Virus Database: 270.10.19/1941 - Release Date: 02/06/09 17:28:00

 1234273017.0