[Public-List] Shore Power, revisited

[mahseer at kos.net]

David use a dremel tool with a diamond tip cutter after drawing the
correct size hole.
John Bor
MAHSEER #380




> All -
>
> Thanks for the input.  There were a couple consistent themes:
> - Use GFCI outlets (or one & daisy chain).  I was already planning to do
> this.
> - Hook in the battery charger.  My second outlet is meant to service the
> battery charger & provide power to the head area if needed
> - Switch to a 30-amp inlet.  OK, any suggestions on how to expand the
> currrent inlet's 2-1/4" hole in the front wall of the cockpit to 2.8" that
> Marinco says is needed for their 30-amp inlet? Even if I had a hole saw
> that
> big, it would be a bear to drill it since there is no material for the
> center bit to go through.  I can borrow a jig saw but 2.8" is a pretty
> tight
> radius.
>
> Agan, thanks for any help
>
> David Swanson
> Strayaway Child
> Alberg 30 #229
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1234271494.0