[Public-List] Bilge pumping using the auxillary engine

C.B. Currier cbcurrier at spinrx.com
Sun Jan 11 17:36:45 PST 2009



You know if you are concerned about bilge trash in this circumstance I
suggest
shop-vacing the bilge & power washing it out. That will
help to some extent as the boats have in most cases gathered quite a
collection of debris below the floorboards.

-- 
C.B.
Currier
Infinity #57
Daybreak #458 - Which needs a good bilge
cleaning.


dickdurk at atlanticbb.net wrote:
> 
> yes, i would put the use of the engine cooling pump to
>
dewater the boat in the "act of desperation" category. The
> inlet side on my boat (a yanmar diesal) is small-something
> like 3/8". unless the engine is running hard, the
>
thermostat cycles, so there is no continuous pumping. Then
> there
is the risk of shelling the impellor with trash;
> losing the pump
action and propulsion.
> 
> It's a great rig for
winterizing, though.
> 
> MichaelGrosh
> #220
> 
> _______________________________________________
> These businesses support your Association:
>
http://www.alberg30.org/store/A30supporters.html
> Please support
them.
> _______________________________________________
>
Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1231724205.0


More information about the Public-List mailing list