[Public-List] sealing thru hulls

[marco lavoie]

Hi there,

 

Not too sure teflon tape is a good idea on the exaust, because of the heat.  You should check in a garage or a mufler shop for that liquid stuff they use on the treads...

 

 

 

Marco.



 


 

> From: r.kingsland at ksba.com
> To: public-list at lists.alberg30.org
> Date: Mon, 1 Jun 2009 12:17:56 -0400
> Subject: [Public-List] sealing thru hulls
> 
> 
> Hi All,
> 
> I got 1-1/2" Marlon seacocks for my cockpit drains and the instructions say
> to seal the thru hull flange w/ Teflon tape. My thru hulls for bilge pump
> and engine exhausts are bronze and I was wondering if I should use Teflon
> tape on those as well? Should I also coat the threads w/ some lock tight?
> 
> Thanks,
> 
> Roger 148
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1243876003.0