[Public-List] Water pump

[Gordon Laco]

Hello David - 

Now that sounds like a good idea.  Can you walk me through what removing the
pump entails?  

Gord #426 Surprise


On 6/15/09 6:44 PM, "Amy & David Swanson" <zira at bellsouth.net> wrote:

> Gord -
> 
> I pull the pump off & change the impeller, then re-install the pump.  That
> way I have fewer, larger screws (bolts) to deal with.
> 
> David Swanson
> Strayaway Child
> Alberg 30 #229
> 
> ----- Original Message -----
> From: "Gordon Laco" <mainstay at csolve.net>
> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
> Sent: Monday, June 15, 2009 12:44 PM
> Subject: Re: [Public-List] Water pump
> 
> 
>> HI Mike -
>> 
>> Ya, I tried loosening the other screws, and I was careful to note the
>> orientation of the plate.  I think my problem is the gasket blocking
>> enough
>> of the threads to keep the screws from biting.  I will remove the plugs
>> when
>> I try again.
>> 
>> Oh how I wish there were a better way to deal with the impellor!
>> 
>> Gord #426 Surprise
>> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1245117777.0