[Public-List] dripless

Bobby capricebob at yahoo.com
Fri Jun 5 07:37:09 PDT 2009


Hey George, 
 
For that dripless packing, can one install this whilst the boat is in the water or will the boat need to be hauled out?  Does it need curing time before getting wet or will the water flowing in impede the installation?  
 
 

--- On Fri, 6/5/09, George Dinwiddie <gdinwiddie at alberg30.org> wrote:


From: George Dinwiddie <gdinwiddie at alberg30.org>
Subject: Re: [Public-List] Source of bilge water
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Date: Friday, June 5, 2009, 1:46 AM


John Brugeman wrote:
> To anyone,
> 
> What is the drip rate for the stuffing box on the prop shaft when
> running?  I think I have tightened mine to tight because it is not
> dripping at all.  Previously, I was pumping about 2 gallons per week
> out of the bilge.

John, with ordinary flax packing, a drip every few seconds is normal while the shaft is turning.  It shouldn't drip at all when not turning.

I use a clay-like packing that allows it to not drip at all.  See http://alberg30.org/maintenance/MechanicalPropulsion/StuffingBox/ for more details.

- George

--  ----------------------------------------------------------------------
  When I remember bygone days                         George Dinwiddie
  I think how evening follows morn;            gdinwiddie at alberg30.org
  So many I loved were not yet dead,           http://www.Alberg30.org
  So many I love were not yet born.                          also see:
               'The Middle' by Ogden Nash     http://idiacomputing.com
----------------------------------------------------------------------



_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



      
 1244212629.0


More information about the Public-List mailing list